Request samples Samples

Plastic-housed on-metal tags

Plastic-housed on-metal tag 155 x 30 mm (MHP-155x30-TF)

Short answer

MHP-155x30-TF is a plastic-housed on-metal tag, 155 x 30 x 10 mm, for metal surfaces. The supplier states a read distance of up to 12 m (EIRP 4 W, on metal). The supplier states an operating range of -25 to +70 °C.
Size
155 x 30 x 10 mm
Stated read distance
up to 12 m
Supplier-stated. EIRP 4 W, on metal
Operating
-25 to +70 °C
Supplier-stated
Memory
EPC 96 bit, user 32 bit
Weight
about 28 g
Request a test kit for this model Request a quote

1.0At a glance

Shape and stated figures

Dimension drawing of Plastic-housed on-metal tag 155 x 30 mmTop view and side view of a rectangular part, 155 mm long, 30 mm wide, 10 mm thick, drawn to one scale. Dimensions in millimeters. A 50 mm scale bar is shown.155 mm30 mm10 mmTop viewSide view50 mm scale
MHP-155x30-TF, drawn from the stated size. Dimensions in millimeters.

Stated read distance

  • up to 12 m EIRP 4 W, on metal Supplier-stated
    Ruler from 0 to 12 mA ruler from 0 to 12 m. It is drawn to its own scale and cannot be compared with the ruler of another stated distance.024681012 m
  • up to 8 m Handheld reader, Alien 9011, on metal Supplier-stated
    Ruler from 0 to 8 mA ruler from 0 to 8 m. It is drawn to its own scale and cannot be compared with the ruler of another stated distance.02468 m

Temperature

Storage temperature -40 to +70 °C Supplier-stated

Storage temperature: -40 to +70 °C, on a scale of -50 to +200 °CA bar on a scale from -50 to +200 °C. The filled part runs from -40 °C to +70 °C (supplier-stated).-500+50+100+200 °C

Operating temperature -25 to +70 °C Supplier-stated

Operating temperature: -25 to +70 °C, on a scale of -50 to +200 °CA bar on a scale from -50 to +200 °C. The filled part runs from -25 °C to +70 °C (supplier-stated).-500+50+100+200 °C

2.0Choosing

Choose the MHP-155x30-TF, or look elsewhere

In favor

  • Choose it when read distance drives the decision: it states up to 12 m (EIRP 4 W, on metal), the longest of the 7 plastic-housed on-metal tags that state that footing (they range from 3 m to 12 m).
  • Choose it when tape alone is not enough: the record lists screw, rivet and glue as well as adhesive tape.
  • Choose it when you need user memory: the record states 32 bit of it next to 96 bit of EPC memory (supplier-stated).

Against

  • Avoid it when the available surface is smaller than 155 x 30 mm: it is the 2nd largest of 7 plastic-housed on-metal tags, and 5 smaller models exist in the family.
  • Avoid it where the tag runs hotter than 70 °C in service: that is the stated operating maximum.

3.0Specifications

Specifications

Identity
Model code MHP-155x30-TF
Body material ABS, other polymer (alternative, not specified)
Color white
Mounting Screw, Rivet, Glue, Adhesive tape
Marking and encoding options Pre-encoding, Laser marking, Logo printing
Dimensions and weight
Size (L x W x H) 155 x 30 x 10 mm
Weight about 28 g
Radio
Chip options NXP UCODE 7m, NXP UCODE 8
Frequency, FCC (US) 902 to 928 MHz
Frequency, ETSI (EU, UK) 865 to 868 MHz
Frequency, China Band not stated
Memory EPC 96 bit, user 32 bit
Read and write EPC and user memory
Air interface EPC Class 1 Gen 2; ISO 18000-6C
Power source Passive, no battery
Read distance, up to 12 m Supplier-stated EIRP 4 W, on metal
Read distance, up to 8 m Supplier-stated Handheld reader, Alien 9011, on metal
Data retention 50 years Supplier-stated
Environment and durability
Storage temperature -40 to +70 °C Supplier-stated
Operating temperature -25 to +70 °C Supplier-stated
Storage humidity 5 to 95 % RH Supplier-stated
Drop test 1 m, 200 drops: passed Supplier-stated
Alcohol test 95 % alcohol: passed Supplier-stated
Gasoline test Passed Supplier-stated
Thermal shock test -40 to +70 °C, 7 cycles, 48 h Supplier-stated Test conditions, not a rating
Temperature cycle test -40 to +70 °C, 7 cycles, 48 h Supplier-stated Test conditions, not a rating
Packaging and supply
Packaging bubble bag, carton
Supply format Single pieces

4.0Reading the figures

What the figures do and do not say

Next to its neighbors

MHP-155x30-TF comparisons below use supplier-stated records.

MHP-155x30-TF's supplier-stated headline is up to 12 m (EIRP 4 W, on metal).

MHP-155x30-TF's next smaller catalog footprint is MHP-70x25-TF (70 x 25 x 5 mm). MHP-155x30-TF to MHP-70x25-TF: length decreases by 85 mm, width decreases by 5 mm and height decreases by 5 mm. Supplier-stated (EIRP 4 W, on metal): up to 12 m for MHP-155x30-TF; up to 3 m for MHP-70x25-TF. Stated weight: MHP-155x30-TF about 28 g; MHP-70x25-TF about 5 g.

MHP-155x30-TF's next larger catalog footprint is MHP-88x57-T (88 x 56.5 x 4 mm). MHP-155x30-TF to MHP-88x57-T: length decreases by 67 mm, width increases by 26.5 mm and height decreases by 6 mm. Supplier-stated (EIRP 4 W, on metal): up to 12 m for MHP-155x30-TF; up to 9 m for MHP-88x57-T. Replacing MHP-155x30-TF with MHP-88x57-T loses the listed screw, rivet and glue options; MHP-88x57-T lists adhesive tape. Chip selection changes from MHP-155x30-TF's NXP UCODE 7m to MHP-88x57-T's Alien Higgs-3. Operating maxima: MHP-155x30-TF 70 °C; MHP-88x57-T 85 °C (supplier-stated). Stated weight: MHP-155x30-TF about 28 g; MHP-88x57-T about 27 g.

Who states these figures

Every performance figure on this page is a supplier statement: read distance, wash life, temperature, tests, pressure and data retention. TagBrio has not tested them, and no test report, laboratory or standard is cited for them. A test envelope is a condition of a test, not a rating. Confirm each figure that matters to you on samples, on your own items and with your own reader.

5.0Mounting

How it is attached

  • Mounting diagram: ScrewA screw passes through the tag and threads into a hole in the metal surface. Labelled: screw, tag, metal surface. Schematic, not to scale.ScrewTagMetal surfaceSchematic, not to scale. Section view.
    General schematic of the method. It does not show this tag.
  • Mounting diagram: RivetA rivet passes through the tag and a metal sheet, and its far end is flared to hold them. Labelled: rivet, tag, metal sheet. Schematic, not to scale.RivetTagMetal sheetSchematic, not to scale. Section view.
    General schematic of the method. It does not show this tag.
  • Mounting diagram: GlueA tag is bonded to a metal surface with glue that rises slightly at the tag edges. Labelled: tag, glue, metal surface. Schematic, not to scale.TagGlueMetal surfaceSchematic, not to scale. Section view.
    General schematic of the method. It does not show this tag.
  • Mounting diagram: Adhesive tapeA tag is stuck to a metal surface with a thin layer of adhesive tape between them. Labelled: tag, adhesive tape, metal surface. Schematic, not to scale.TagAdhesive tapeMetal surfaceSchematic, not to scale. Section view.
    General schematic of the method. It does not show this tag.

6.0Variants

Variants and chips

Frequency variants
Region Band Order suffix
FCC (US) 902 to 928 MHz FCC
ETSI (EU, UK) 865 to 868 MHz ETSI
China Band not stated Not stated
Chip facts published by the vendors for MHP-155x30-TF
Chip Memory published by the vendor Source
NXP UCODE 7m user 32 bit NXP UCODE 7 and UCODE 7m product page Read on
NXP UCODE 8 EPC 128 bit, no user memory NXP UCODE 8 and UCODE 8m product page Read on

7.0Compared

Consider these instead, and compare the neighbors

Models to consider instead of the MHP-155x30-TF
Model Look at it when What its record says
Plastic-housed on-metal tag 70 x 25 mm MHP-70x25-TF The available surface is smaller than 155 x 30 mm MHP-70x25-TF is 70 x 25 x 5 mm, the next smaller model in the family. Under the same stated footing (EIRP 4 W, on metal) it states 3 m against 12 m.
Plastic-housed on-metal tag 88 x 56.5 mm MHP-88x57-T The tag runs hotter than 70 °C in service MHP-88x57-T states an operating maximum of 85 °C and is 88 x 56.5 x 4 mm. Under the same stated footing (EIRP 4 W, on metal) it states 9 m against 12 m.
MHP-155x30-TF next to the models closest to it in size
Specification Plastic-housed on-metal tag 155 x 30 mm MHP-155x30-TF This model Plastic-housed on-metal tag 88 x 56.5 mm MHP-88x57-T Plastic-housed on-metal tag 70 x 25 mm MHP-70x25-TF Plastic-housed on-metal tag 85 x 20 mm MHP-85x20-TF
Size (L x W x H) 155 x 30 x 10 mm 88 x 56.5 x 4 mm 70 x 25 x 5 mm 85 x 20 x 11 mm
Weight about 28 g about 27 g about 5 g about 10 g
Chip options NXP UCODE 7m, NXP UCODE 8 Alien Higgs-3, Impinj Monza 4QT NXP UCODE 7m, NXP UCODE 8 Impinj Monza 4QT, Impinj Monza R6
Memory EPC 96 bit, user 32 bit Not stated NXP UCODE 7m: EPC 96 bit, user 32 bit; NXP UCODE 8: EPC 128 bit, no user memory Not stated
Mounting Screw, Rivet, Glue, Adhesive tape Adhesive tape Screw, Rivet, Glue, Adhesive tape Screw, Rivet, Glue, Adhesive tape
Operating temperature -25 to +70 °C Supplier-stated -20 to +85 °C Supplier-stated -40 to +70 °C Supplier-stated -25 to +70 °C Supplier-stated

8.0Questions

Questions about the MHP-155x30-TF

Answers quoted from the record

How far can the MHP-155x30-TF be read?

The supplier states up to 12 m (EIRP 4 W, on metal) and up to 8 m (Alien 9011 handheld, on metal). TagBrio has not tested either figure, so read a sample on your own part before you rely on them.

How is the MHP-155x30-TF attached?

The record lists adhesive tape, screw, rivet and glue. Confirm the fixing on your own material and surface before you order in volume.

What temperatures does the MHP-155x30-TF state?

The supplier states an operating range of -25 to +70 °C and a storage range of -40 to +70 °C. A storage range is not an operating range, and a test envelope is not a rating. Both are supplier-stated.

Which chip and memory does the MHP-155x30-TF list?

The record lists NXP UCODE 7m and NXP UCODE 8 as chip options. Memory: EPC 96 bit, user 32 bit (supplier-stated).

Which frequency variants does the MHP-155x30-TF come in?

FCC at 902 to 928 MHz and ETSI at 865 to 868 MHz. The record also names China but states no band, so this page lists none. Say which region the tags will be read in when you ask for a quote.

Can the MHP-155x30-TF be encoded or marked?

The record lists pre-encoding, laser marking and logo printing. Ask the team which combination is available for your order.

Test it on your own surface

Samples are handled per request. The team confirms availability and terms by email.

Request a test kit Request a quote